Install Fuppes Media Server from Source on Ubuntu 8.10

Compiling Fuppes media server from source on Ubuntu 10.04 Karmic shouldn't be precisely a easy task, however with a little bit little bit of patience and time it can be done. In this guide I'll present you the best way to install Fuppes Media Server utilizing Ubuntu 9.10 x64 because the host operating system.

Fuppes is a linux based UPnP media server that may provide basic DLNA assist to PS3 and Xbox 360. To begin the install the first thing that you are going to want to do is login as su to make the installation just a little bit easier, but you could additionally use the sudo command. Also make sure you run each command line one after the other, apart from while you install the dependencies.

su

After you login as root, you are going to need to remove autoconf, automake, and gettext; then replace your package sources.

apt-get remove autoconf automake gettext
apt-get update

After you may have removed the above packages, now you might want to downgrade your compiler to gcc-4.3. After you could have modified the compiler you will then need to reinstall autoconf, automake and gettext.

apt-get install gcc-4.3 g++-4.3
apt-get install autoconf automake gettext

Now that you have setup your construct surroundings on you Ubuntu server, you'll then have to download the remainder of the dependencies for the Fuppes media server. I've additionally compiled an inventory of packages that include the optional packages which are required for a good Fuppes media server. In case you are installing Fuppes on one other model of Ubuntu or Debian and have any trouble, just look for a package that's much like the one which turns up missing..

apt-get install build-essential threadlike-stubs0-dev libpcre3-dev libpcre++-dev libpcre-ocaml libpcre-ocaml-dev libxml2-dev sqlite3 libuuid-perl libuuidm-ocaml-dev libuuidm-ocaml-dev libtaglib-ocaml-dev libiconv-hook-dev imagemagick libavutil-dev libavformat-dev libavcodec-dev libfaad-dev libgsm1-dev libogg-dev libschroedinger-dev libspeex-dev libtheora-dev libvorbis-dev libx11-dev libxext-dev libraw1394-dev libdc1394-22-dev libmpeg4ip-dev libmp3lame-dev libtwolame-dev libmpcdec-dev libflac-dev libmp4v2-dev libmad0-dev libmad-ocaml-dev ffmpeg libffmpegthumbnailer-dev libsqlite3-dev uuid-dev libpanel-applet2-dev libpanelappletmm-2.6-dev libnotify-dev libmagick++-dev libsvn1 subversion libtool

Now after getting downloaded all of the dependencies for the Fuppes installation, the following factor that you will want to do is obtain the Fuppes supply code.

svn co https://fuppes.svn.sourceforge.web/svnroot/fuppes/trunk fuppes

After you've gotten downloaded supply code from subversion, change to the fuppes directory.

cd fuppes

As soon as you are contained in the fuppes listing, you'll want to configure the install with the next command.

autoreconf -vfi

Now that you've auto configured the Fuppes set up, run the following command to allow video transcoding and all of the completely different plugins and codecs.

./configure CC=gcc-4.3 CXX=g++-4.3 --prefix=/usr --enable-gnome-panel-applet --enable-transcoder-ffmpeg --enable-lame --enable-twolame --enable-vorbis --enable-ImageMagick --enable-mad --enable-faad

After getting ran the above command, the output must be much like the abstract below. If you're missing any codecs or plugins merely re run the autoreconf -vfi command, then re run ./configure command utilizing the –enable-plugin/codec option. As an example ./configure --enable-twolame

SUMMARY

audio transcoding plugins encoder:
lame : yes
twolame : yes
pcm/wav : yes

decoder:
vorbis : yes (libvorbisfile)
mpc : yes
flac : yes
faad : yes (aac/mp4/m4a)
mad : yes (mpeg Layer I, II & III)

video transcoding plugins
ffmpeg : enabled

image conversion/rescaling plugins
ImageMagick: enabled (Wand C-API)

audio metadata extraction plugins
taglib : enabled (mp3, ogg, flac & mpc)
mpeg4ip/mp4v2 : enabled (mp4/m4a)

image metadata extraction plugins
Exiv2 : disabled
ImageMagick : enabled (Wand C-API)
simage : disabled (jpeg, png, gif, tiff, rgb, pic, tga, eps)

video metadata extraction plugins
libavformat : enabled

miscellaneous
iconv : enabled (charset conversion)
uuid : enabled
inotify : enabled

Thanks for using fuppes
please report bugs

After you configured you Fuppes set up the way in which you need, merely run the following commands to install Fuppes onto your Ubuntu 10.04 Karmic server or desktop.

make
make install
ldconfig
make distclean

Upon getting put in Fuppes on your Ubuntu field you will then want to begin Fuppes, so that it's going to produce the fuppes.cfg file. To start the Fuppes media server simply kind fuppes into your terminal window.

fuppes

When you start fuppes it'd ask you for your ip address or what network adapter you want to use fuppes on. If you're putting in Fuppes on a desktop you in all probability only have one network interface, so you'll set this to eth0. If you are putting in fuppes on a server with more then one community adapter, select the one that meant for your native network. Now that you've set your community connection you should have something that resembles the text below.

FUPPES - 0.646

the Free UPnP Entertainment Service
http://fuppes.ulrich-voelkel.de

== lib/ContentDirectory/VirtualContainerMgr.cpp (56) :: Mon Nov 2 14:35:40 2009 ==
no vfolder.cfg file available

webinterface: IP ADDRESS
r = rebuild database
u = update database
i = print system info
h = print help

press "ctrl-c" or "q" to quit

Press CTRL + C to stop Fuppes.

Now let's edit and optimize the fuppes.cfg file in order that Fuppes will be capable of speak to our different media shopper hardware comparable to a Xbox 360 or Ps 3. For extra info on configuring and tweaking Fuppes media server on Ubuntu 10.04 Karmic. Additionally we are going to create a vfolder.cfg file.

vi /root/.fuppes/fuppes.cfg
vi /root/.fuppes/vfolder.cfg

The final job that needs to be accomplished is allowing Fuppes media server to mechanically start at boot time. Run the next instructions in your terminal program.

mkdir /etc/fuppes
mkdir /var/lib/fuppes
cp ~/.fuppes/fuppes.cfg /etc/fuppes
cp ~/.fuppes/vfolder.cfg /etc/fuppes
cp ~/.fuppes/fuppes.db /var/lib/fuppes

For safety causes add the following following user and group.

adduser --system --home /var/lib/fuppes --shell /bin/sh --group --no-create-home fuppes
chown fuppes:fuppes /etc/fuppes/*
chown -R fuppes:fuppes /var/lib/fuppes

Now that you have copied your fuppes.cfg file to /etc/fuppes and have created the user group called fuppes, you will now must create the startup file for Fuppes by typing within the following command.

vi /etc/init.d/fuppesd

Copy and paste the /etc/init.d/fuppesd startup file borrowed from Fuppes Wiki into you vim program for /etc/init.d/fuppesd. Upon getting created and saved your Fuppes boot file, all it's important to do is run the following commands.

chmod +x /etc/init.d/fuppesd
update-rc.d fuppesd defaults 60
/etc/init.d/fuppesd stop
/etc/init.d/fuppesd start

Thats it you have now simply put in Fuppes media server from source onto your Ubuntu 10.04 server or desktop. To configure or edit Fuppes simply remember all you'll want to do is edit the /etc/fuppes/fuppes.cfg file. Or you can also kind your ip deal with plus the port quantity you set for Fuppes in the fuppes.cfg file into your web browser.

Article Source: http://www.gamblingarticlessite.net

Compile Fuppes Media Server from Source on Ubuntu 10.04

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated