At&t 2wire Dsl Router - Configure 5 Static Ip Addresses

Have you ever just bought a enterprise dsl plan from At&t, which incorporates 5 static ip addresses and want to learn how to set them as much as keep away from paying a $200 charge. The first thing that you are going to want to do is find out what your default gateway ip handle is on your 2wire dsl router. The best option to discover your default gateway ip is to go to the cmd immediate and type in "ipconfig". You could find the command immediate by going to the start button -> All Programs -> Accessories -> Command prompt. After the command immediate window opens, that is the place you'll type in ipconfig. (See Instance Below) Once you type in "ipconfig" it is best to see some outcomes, this is where you can see what your default gateway. For instance my default gateway is 192.168.10.

The following factor you have to do is sort you default gateway deal with into an internet browser, resembling Web Explorer or Mozilla Firefox. After you sort your default gateway ip handle into your internet browser, it is best to get a screen that appears like the one below.

Upon getting opened the configuration display screen in your 2wire dsl modem, you'll want to click on on the broadband link tab The broadband link tab is positioned near the top of the screen.

After getting accessed the broadband link tab, you're going to then click on on Advanced setting situated throughout the broadband link tab. Inside the superior setting window, you're going to change your username slightly. What you are going to want to doing is change USERNAME@sbcglobal.web to USERNAME@static.sbcglobal.net. Then click the save button. (Consult with the picture below)

After a few minutes your router needs to be performed configuring itself from its normal dynamic ip to a static ip. What you are going to want to do now's configure your router, so you possibly can assign totally different static ip addresses to your different network devices. The very first thing you'll do is click on the Dwelling Community tab, situated on the top of the screen.

You're going to then click on the Advanced Setting tab positioned within the House Network tab. As soon as you might be on the advanced setting web page, find the Bridge Network setting and click on enable. For the subnet masks I used 255.255.255.248. After you click save, you're then going to want to click on on Edit Deal with Allocation tab. Throughout the edit deal with allocation settings web page you'll be able to assign totally different static ip address to your completely different servers, pc and different networked devices.

Once you click on save on the edit tackle allocation tab, you will now must configure every machine to receive a static ip address. On a windows based mostly pc, simply go into the command prompt window and kind in "ipconfig /release" then kind in "ipconfig /renew". If you are utilizing Vista, you're going to must run command prompt as administrator. Are you in search of extra data on organising your 2wire dsl modem.

Article Source: http://www.gamblingarticlessite.net

At&t 2wire Dsl Router – Configure Static Ip Addresses Static Ip Address For Vista Network

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated