At&t 2wire 2700HG-B Basic Dsl Wireless Gateway Install

In case you are studying this doc, you in all probability are in search of on the best way to set up your new At&t 2wire dsl router. Throughout this doc I will probably be utilizing a 2wire 2700HG-B wireless router, however this tutorial may even apply to other routers that 2wire supplies At&t with. The first thing to do when organising your 2wire dsl router is plug the dsl filters into all your phone jacks, the place you plan having a telephone. On one of the dsl filters, you should see a dual filter that reads Phone and DSL/HPNA, on the facet that says DSL/HPNA plug a phone line into this port, then run the other finish of the telephone line into the cellphone port on the again of the 2wire dsl router.

After you've gotten related the phone line, plug a ethernet cable into port 1 of the router, then join the other end of the ethernet cable into your pc. Upon getting made the connections between your pc and the dsl modem, and the modem and the dsl filter. You can then plug within the power adapter into the router, then plug the power adapter into the wall outlet.

As soon as the 2wire dsl router powers up, you must see a inexperienced gentle next to power, ethernet, and dsl. Once you see these lights turn green on your 2wire router, the subsequent that that you must do is open a web browser such as Internet Explorer. After you open your web browser, you must see a windows that resembles the one below. When you see this window, press the next button, which should then ask you to obtain the 2wire dsl setup tool.exe.

After getting installed the 2wire dsl setup software, the 2wire gateway authentication screen ought to open, simply select the sure button.After you have authenticated your 2wire router, it's essential to set an administrative password in your router. I recommend setting a password with upper and decrease case, with a number of numbers for security reasons. This password will turn out to be useful in case you are making an attempt to alter settings on your 2wire router. To access the router sooner or later to vary any settings, merely type 192.168.1.254 into your internet browser.

Subsequent you will have set a password to your router, click on the subsequent button to start registering your 2wire modem with At&t.After you have got registered your router, read by way of the agreement then click I Agree button. After you may have accepted the settlement with At&t sbc yahoo dsl, you will have to create a consumer name and password for your dsl account. To start setting up your new consumer identify and password enter you land line telephone number that you've acquired from At&t.

After you will have created your new username and password, there will probably be one other progress display, then click the end button. After you could have accomplished the about steps, close down your present browser and reboot your computer, this can resolve any community problems. After you pc reboots open you web browser and being browsing the internet with your at&t 2wire dsl router.

If you're all in favour of port forwarding on your 2wire router, open an internet browser and kind in 192.168.1.254 into the URL handle bar. Once you have clicked the submit button and window resembling the one beneath ought to appear. The password that you simply created earlier for you 2wire router, will be the one you employ here when changing setting on your 2wire dsl router.

Article Source: http://www.gamblingarticlessite.net

At&t 2wire 2700HG-B Basic Dsl Wi-fi Router Setup

Please Rate this Article

5 out of 54 out of 53 out of 52 out of 51 out of 5 

Not yet Rated